Haas VF-5/50XT machining centre
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
+49 162 5858448
Location: IT
Spindle Power: 22.4 kW
Taper Size: BT 50
Spindle Nose to Table (max): 32.9 in / 836 mm
Spindle Nose to Table (min): 7.9 in / 201 mm
Spindle Max Torque: 340.0 ft-lbf @ 700 rpm / 460.0 Nm @ 700 rpm
Spindle Drive System: 2-Speed Gearbox
T-Slot Width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm
T-Slot Center Distance: 3.15 in / 80 mm
Number of Std T-Slots: 7
Max Weight on Table (evenly distributed): 4000 lb / 1814 kg
Max Cutting Feedrate: 500 ipm / 12.7 m/min
Rapid Traverse (X, Y, Z): 710 ipm / 18.0 m/min
Max Thrust X: 3400 lbf / 15124 N
Max Thrust Y: 4100 lbf / 18238 N
Max Thrust Z: 5600 lbf / 24910 N
Tool Changer Type: SMTC (Side-Mount Tool Changer)
Tool Capacity: 30+1
Max Tool Diameter (full): 4.0 in / 102 mm
Max Tool Diameter, Large (adjacent empty): 7.0 in / 178 mm
Max Tool Length (from gage line): 16.00 in / 406 mm
Tool-to-Tool Time (avg): 4.20 s
Chip-to-Chip Time (avg): 6.30 s
Coolant Capacity: 95 gal / 360 L
Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar
Inline Air Hose: 3/8 in
Coupler (Air): 3/8 in
Air Pressure Min: 80 psi / 5.5 bar
Input AC Voltage (3 Phase) - Low: 220 VAC (70 A Full Load)
Input AC Voltage (3 Phase) - High: 440 VAC (35 A Full Load)
Domestic Shipping Pallet Dimensions: 168.0 in x 102.0 in x 125.0 in / 427 cm x 260 cm x 318 cm
Export Crate Dimensions: 168.0 in x 102.0 in x 130.0 in / 427 cm x 260 cm x 331 cm
Shipping Weight: 16250 lb / 7371.0 kg
running hours: 0 (Showroom machine)
Additional equipment
Machine vise mounted on T-slot table
Air gun attachment
Spray container and cleaning brush holder mounted on control arm console