Haas UMC-750 machining centre
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
+49 162 5858448
Location: IT
Spindle Power: 22.4 kW
Taper Size: BT 40
Spindle Nose to Platter (~ max): 24.0 in / 610 mm
Spindle Nose to Platter (~ min): 4.0 in / 102 mm
Spindle Max Torque: 90.0 ft-lbf @ 2000 rpm / 122.0 Nm @ 2000 rpm
Spindle Drive System: Inline Direct-Drive
Spindle Taper: CT40 | BT40 | HSK-A63
Spindle Bearing Lubrication: Air / Oil Injection
Spindle Cooling: Liquid Cooled
B Axis (Tilt) Travel: +120° to -35°
B Axis Max Speed: 170 °/sec
B Axis Continuous Torque: 2240 ft-lbf / 3037 Nm
B Axis Brake Torque: 2000 ft-lbf / 2712 Nm
C Axis (Rotation) Travel: 360°
C Axis Max Speed: 179 °/sec
C Axis Continuous Torque: 1854 ft-lbf / 2514 Nm
C Axis Brake Torque: 900 ft-lbf / 1220 Nm
Max Part Swing: 27.0 in / 686 mm
Platter Diameter: 19.70 in / 500 mm
Max Weight on Platter: 660 lb / 300.0 kg
Max Weight on Platter w/ Pallet Pool: 200 lb / 90.7 kg
T-Slot Width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm
Number of Std T-Slots: 7
T-Slot Center Distance: 2.48 in / 63 mm
Max Cutting Feedrate: 833 ipm / 21.2 m/min
Rapid Feedrate (X, Y, Z): 1200 ipm / 30.5 m/min
Max Thrust X / Y: 3300 lbf / 14680 N
Max Thrust Z: 4050 lbf / 18015 N
Tool Changer Type: Side-Mount Tool Changer (SMTC)
Tool Capacity: 30+1
Max Tool Diameter (full): 2.5 in / 64 mm
Max Tool Diameter (adjacent empty): 5.0 in / 127 mm
Tool-to-Tool Time (avg): 1.80 s
Chip-to-Chip Time (avg): 2.40 s
Coolant Capacity: 55 gal / 208 L
Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar
Air Pressure Min: 80 psi / 5.5 bar
Electrical Input AC Voltage (3 Phase): 220 VAC (70 A) / 440 VAC (35 A)
Shipping Weight (Standard): 14250 lb / 6463.8 kg
Showroom Machine