New TyreON T1000 truck tyrechanger 56 Inch 2 mounting speeds - fully automa truck tire changer
Akersloot6460 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+31 6 537...
Show
+31 6 53701658
+31 72 540...
Show
+31 72 540 1002
Netherlands 
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Lelystad
Lithuania, Vilnius
Rims 14 - 56 Inch
Wheels up to 2000 kg - Ø 250 cm - 120 cm ↔
Mounting speed 2-speed | 4 + 8 rpm
Bead breaker force 5000 up to 8000 kg
Operation Electric-hydraulic
Gear motor-chuck 3.3 - 4.0 kW
Hydraulic pump 3.3 - 4.0 kW
► Hydraulic rotating mounting head
► 2nd hydraulic gear
► 2 carriages - horizontal movement of both the chuck and mounting arm
In wooden box L231 x W208 x H110 cm - 1300 kg
Voltage 400V (no compressed air required)
Including Free accessoires
Super heavy duty truck tyrechanger for tube and tubeless tyres and rims of
Heavy construction- and earth moving equipment
Heavy agricultural tractors, vehicles and machines
Trucks, tractor units and trailers
City buses, coaches and commercial vehicles
A fully automatic tyrechanger for intensive and heavy work with two 4 kW motors and a hydraulic rotating mounting head.
With a 2-speed chuck and a second gear for all hydraulic movements.
TyreON T1000
Super Heavy Duty Truck Tyrechanger
Work with extremely heavy wheels without complicated maneuvers
The larger the wheel, the heavier it is to roll it over and maneuver it.
For that reason the TyreON T1000 has been designed with a large floorplate without hydraulic moving ramp.
The heavy wheel can be rolled to any position on the floor plate
By joystick you move the chuck horizontally to the wheel to grab the rim and lift the heavy wheel
In this way, large tires on heavy rims can be easily disassembled without a moving ramp
Delivered ready for operation
Reliable and very powerful heavy duty truck tyrechanger
CE certified and 1 year warranty on all parts
Compiled with Bucher Hydraulics - market leader in innovative drive technology
Filled with hydraulic oil and fully tested before it is packed
Comes with accessories to change truck tires directly
Solid construction, completely finished with powder coating
Very strong clamping and bead breaking force, controlled by joysticks
Ready for use upon receipt, easy to install
With a central lifting eye and floor anchoring holes
With main switch, cord and power plug - no compressed air required!
Fully automatic -hydraulic rotating mountinghead
Changing large tires with this super heavy duty truck tyrechanger is fully automated.
All functions, from the hydraulic clamping and electric rotation of the wheel up to the hydraulic rotation of the mountinghead, are automated.
The controller allows one to perform 14 movements, you roll the wheel onto the floor plate and the truck tyre changer does the heavy work.
Optimum performance - floor plate under the entire machine
The TyreON T1000 is equipped with a floor plate under the entire machine to collect grease and dirt and a central check valve in its hydraulic system to maintain the operating pressure.
Optimum performance due all hydraulic movements are smooth and full powered plus the longer technical lifetime of the hydraulic pump.
For intensive use - without damage to tyres or rims
The all round truck tyre changer for intensive use is equipped with a heavy loads resistant mounting arm compiled with a strong disc and a hinged hook.
The hinged parts are fitted with grease nipples, by regularly lubricating the nipples the truck tyre changer is working well and wear and tear is prevented.
TyreON T1000 heavy duty truck tyrechanger - a machine with unique features
Fast and efficient
The portable controller allows you to move simultaneously both the chuck and the mountingarm from and towards each other.
It speeds up work, contributes to the bead breaking force and makes it easier to change tyres up to 1.2 meters wide.
Hydraulic pump with second gear
In addition to the 2-speed chuck, also the hydraulic pump has a second gear for all 12 hydraulic movements.
The operation - controller with joysticks
Handy ergonomic 24V controller with foot pedals and joysticks for precise adjustment
Powerful 2-speed 4.0 kW electric motor for the clockwise and anticlockwise rotation of the chuck
Top quality 4.0. kW hydraulic aluminum gear pump with a second gear, branded Bucher Hydraulics
Chuck with 4 hydraulic clamping arms of hardened steel for clamping and lifting the wheel
The hydraulic chuck moves horizontally in both directions
The mounting arm on the hydraulic sliding carriage moves horizontally in both directions
The mounting arm moves hydraulically up and down
The mounting head with disc and hook rotates hydraulically
Truck mounting accessories available
The techniques and possibilities of the TyreON T1000
Technical details T1000 (400V)
For rims with size 14 - 56 Inch A
Maximum wheel diameter 250 cm D
Maximum width of the wheel 120 cm C
Maximum wheel weight 2000 kg
Clamping range 13,5 - 115,5 cm
Clamping range with 4 clamping arm extensions 71 - 155 cm
Bead breaker force - nominal 5000 kg / 49.031 kN F
Bead breaker force - maximal 8000 kg / 78.453 kN F
Operating pressure - hydraulic 250 Bar
Performance hydraulic pump motor 3.3 - 4.0 kW 1450 - 2860 rpm F
Performance gear motor - electric rotation of the chuck 3.3 - 4.0 kW E
Mounting speed - rotation of the chuck - clockwise and anticlockwise 2 speed
Rotations per minute of the chuck 4 - 8 rpm
Number of automated movements by controller 14 movements
Operating voltage of the controller 24 Volt (DC)
Number of positions of the mounting arm on the sliding carriage 1 (stepless) positions
Weight completely packed / net 1300 / 1141 kg
Noise level 65 - 85 dBA
Rotating chuck with 4 self centering clamping arms ✓
Non return valve - continuous oil-pressure ✓
Grease nipples ✓ F
2nd hydraulic gear - 2860 rpm ✓
Voltage 400V - 3Ph
Fuse C20A
Required floor area (length x width) 220 x 190 cm
Delivery
All functions of the TyreON T1000 heavy duty truck tyrechanger are tested carefully before the machine is packed in a sturdy wooden box with:
The wired portable control unit
TyreON TRC ST rim clamp for trucks, agricultural and construction equipment
A grease gun and lubricant for the sliding carriage etc.
3 tire levers, a tyre soap brush and a bucket tyre soap
4 clamping arm extensions
A widening floor plate and a ramp
The installation and operating manual
Hydraulic oil (hv-iso-32 is included)
T1000 truck tyrechanger 56 Inch 2 mounting speeds - fully automatic - power 4kW+4kW