Richpeace Automatic Medical Mask Production Line
7434 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
+386 41 63...
Show
+386 41 638 845
+386 1 724 ...
Show
+386 1 724 82 58
Poland, Location:łódź
Poland, Location:łódź
Portugal, Ramalhal
Spain
Finland, Tampere
Belgium, Deinze
Belgium, Deinze
Spain
Germany, Location:nuremberg
Germany, Enger
Belgium, Deinze
This machine is used for the automatic production of flat three-layer masks by automatic forming
from non-woven fabric rolls, automatic transfer, with a nose clip and rolled material of a set length cut
simultaneously, folding at the edges of the mask, folding and flattening, joining by ultrasonic welding,
cutting and forming, ultrasonic welding of loops for ears, etc. - All these processes are done
automatically.
Main parameters:
-Suitable for mask types: Regular three-layer medical mask (disposable medical masks), surgical mask and medical protective mask
-Product specification: Mask for adults: 175 mm x 95 mm, optional child mask 165 mm x 95 mm; or 145 mm x 95 mm
-Speed: 60 pcs/min
-Material: PP non-woven composite fibres (three layers), typically 25 g per square meter
-Other materials: Nose clip (3 mm), ear loops (nylon with elastic, usually 3 mm)
-Processing method: Ultrasonic welding
-Air flow volume: 1700 l/min
-Power: 20 KW, 220V/50Hz
-Dimensions: 10m x 10m x 2m
-Weight: 3000kg
Technical features:
(1) Self-alignment of three rolls of material fed into the machine, i.e. the outer, filter and inner
layer. Continuous symmetrical ultrasound compression of both sides. Continuous pressing with
rollers, followed by cutting. The production line branches off into two separate welding machines
for attaching ear loops, enhancing line balancing and achieving high productivity. Automatic
counting and folding after the ear loops are welded.
(2) The production line follows the »1 in 2« principle, which is the core component of the
mask production system, distributing two sets in production for to weld the ear loops.
(3) Ear loops can be made by automatic cutting and automatic welding with ultrasound.
(4) The nose clip can be made by automatic feeding and cutting.
(5) The system offers stability, few malfunctions, a pleasant appearance, high efficiency, energy
savings and full automation.
Ta stroj se uporablja za avtomatsko proizvodnjo ploščatih trislojnih mask s samodejnim
oblikovanjem iz zvitkov netkane tkanine, samodejnim prenosom, s trakom za čez nosni koren in zvitim
materialom z nastavljeno dolžino, ki se odreže sočasno, zgibanjem na robovih maske, zgibanjem in
sploščenjem, spajanjem z ultrazvočnim varjenjem, rezanjem in oblikovanjem, ultrazvočnim varjenjem
zank za ušesa, itd. Vse to se izvaja samodejno.
Glavni parametri:
-Primerna za vrsto maske: Običajna trislojna medicinska maska (medicinske maske za enkratno uporabo), kirurška maska in medicinska zaščitna maska
-Specifikacija izdelka: Maska za odrasle: 175 mm x 95 mm, možna otroška maska 165mm x 95 mm; ali 145 mm x 95 mm
-Hitrost: 60 kos/min
-Material: PP netkana kompozitna vlakna (trije sloji), tipično 25g m2
-Drugi materiali: Mostiček čez nosni koren (3 mm), zanke za ušesa (najlon z elastiko, običajno premer 3 mm)
-Način obdelave: Ultrazvočno varjenje
-Volumen pretoka zraka: 1700 l/min
-Moč: 20 KW, 220V/50Hz
-Dimenzije: 10m x 10m x 2m
-Teža: 3000kg
Tehnične značilnosti:
(1) Samoporavnava treh zvitkov materiala, ki se podajajo v stroj - zunanji, filtrirni, notranji sloj.
Kontinuirano simetrično stiskanje obeh strani z ultrazvokom. Kontinuirano pritiskanje z valji, potem
rezanje. Odcep v dve ločeni varilni napravi za zanke za ušesa, da se izpolni uravnoteženje linije ter
doseže visoka produktivnost. Ko se zanke za ušesa privarijo, samodejno štetje in zlaganje.
(2) Proizvodna linija se ravna po teoriji »1 v 2«, kar je glavni komplet sistema za proizvodnjo
mask, da se pri proizvodnji porazdelita dva kompleta za varjenje zank za ušesa.
(3) Zanke za ušesa se lahko izdelajo z ultrazvočnim samodejnim rezanjem in samodejnim varjenjem.
(4) Mostiček čez nosni koren se lahko izdela s samodejnim podajanjem in rezanjem.
(5) Močna stabilnost, malo okvar, prijeten izgled, visoka učinkovitost ter prihranek energije,
popolna avtomatizacija.