Galaxy QS Machines – GS-24 PLUS Series: 200 & SPM Models other packaging machinery
Location:cologne
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
Show
+49 89 38031644
Germany, Location:münster
Germany, Location:frankfurt
Germany, Location:stuttgart
Germany, Location:münster
Germany, Emskirchen-Pirkach
Germany, Warburg
Germany, Dabergotz
Germany, Weil der Stadt
Germany, Itterbeck
Germany, Cologne
Germany, Cologne
Germany, Weil der Stadt
Germany, Salzgitter-Bad
Offered as a package deal
GS-24 PLUS 200
and
GS-24 PLUS SPM
machines included
Machine 1
(Has two individual sealing units arranged one behind the other)
Model
GPPL-GS-24-Plus-200
Year of Manufacture
2020
The machine set is capable of producing various pouch types
including
Three Side Seal Pouches (with/without zipper)
Stand-up Pouches (with/without zipper)
Both Side Gusset Pouches
Shape Pouches (via attachment)
Bottom Film Synchronization & Laminate Roll Conversions
Applicable Films
Heat-sealable laminated films
PET poly
PET MET poly
PET ALU foil poly
paper poly
multi-layer films (e.g
PA/PE)
Production Range
Output: Up to
200 shots/min
or
35 meters/min
Actual output depends on pouch size
repeat length
and laminate type
Product Size Range
Three Side Seal Pouch
100–600 mm (W) x 100–400 mm (L)
1–2 line operations
Stand-up Pouch
Single: 150–600 mm (H) x 80–320 mm (W) x 60–200 mm (gusset)
Double: 100–300 mm (H) x 80–320 mm (W) x 60–200 mm
Gusseted Pouch
600 mm (W) x 400 mm (L) x 200 mm gusset
Shaped Pouches
Single: 150–570 mm (H) x 80–260 mm (W) x 60–200 mm
Double: 100–285 mm (H) x 80–260 mm (W) x 60–200 mm
Operational Configuration
Max Web Width: 600 mm
Max Cutting Length: 400 mm (Multi Skip)
Min Cutting Length: 50 mm
Unwinder Width: 400–1200 mm
Gusset/Stand-Up Feed Width: 60–200 mm
Max Gusset/Bottom Feed Roll Dia: 600 mm
Machine Dimensions
Utilities Required (Buyer Scope)
Compressed Air: 30 CFM @ 6 BAR
Chilled Water: 15 L/min @ 10°C–12°C
Power Supply: AC 3-Phase / 415 V / 50 Hz
Power Load: 100 kW
Electrical Specification
Total Servo Motors: 9 (with PLC & HMI)
Brands
B&R Austria
(Servo drive
PLC
Prime Mover)
P&F Germany
(Sensors
Photocell)
Dynaspede + E+L
(Tension Control)
Oriental Japan
(Geared Motor)
Schneider
(Switchgear)
Fraser
(Static Charger)
Pouch Changeover Time
Approx
2 to 3 hours
Machine 2
(has only one bottom/zipper sealing unit)
Model
GS-24 PLUS SPM – QS
Year of Manufacture
2023
The machine was capable of producing the following pouch types
Three Side Seal Pouch
Stand-Up Pouch
Both Side Gusset Pouch
Stand-Up Pouch from same Laminate Roll
Quad Seal Pouch from same Laminate Roll (Optional via Attachment)
Applicable Film
Compatible with heat-sealable laminated films
PET poly
PET MET PET poly
PET Alu foil poly
PET paper poly
Multi-layer outer PA PE film types
Production Range
Maximum Output: 200 shots/min
Web Speed: Up to 35 meters/min
Actual output variable depending on repeat length
pouch type
laminate type
Product Size Range
Three Side Seal Pouch (Single to Double Line Operations)
100 mm to 600 mm (W) × 100 mm to 400 mm (L)
Stand-Up Pouch
Single Line: 150 mm to 600 mm (H) × 80 mm to 320 mm (W) × 60 mm to 200 mm (Gusset)
Double Line: 100 mm to 300 mm (H) × 80 mm to 320 mm (W) × 60 mm to 200 mm (Gusset)
Both Side Gusset Pouch
600 mm (W) × 400 mm (L) × 200 mm (Gusset)
Quad Seal Pouch (Optional)
500 mm (W) × 400 mm (L) × 100 mm (Gusset)
Operational Configuration
Maximum Operating Web Dia: 600 mm
Cutting Length: 50 mm to 400 mm (Multi Skip System)
Max. Primary Unwinder Width: 1100 mm
Min. Primary Unwinder Width: 400 mm
Gusset Width in Feed Roll: 60 mm to 200 mm
Max Gusset Roll Dia: 600 mm
Machine Dimensions ( Approx)
Utilities required ( Buyer's Scope )
Compressed Air: 30 CFM @ 6 BAR
Chilled Water: 15 liters/min at 2 BAR @ 10–12°C
Electrical: 415 V / 50 Hz / 3-Phase
LAN: One connection for remote maintenance
Earthing: Three points
Electrical Specifications
Servo Drives (B&R Austria)
1.3 Nm – 2 Nos
14 Nm – 4 Nos
40 Nm – 1 No
4.5 Nm – 2 Nos
Total Servo Motors: 9 Nos with PLC & HMI
Photocell (Auto Teach Mode): P&F Germany
Temp Controller: B&R Austria
Prime Mover (Planetary Gear Box): B&R Austria
Proximity Sensors: P&F Germany
Tension Control: E+L Germany
Geared Motor: Rotomotive or MGM
Switch Gears: Eton Japan
Static Charger (10 KV): Fraser UK
Ultrasonic Unit: Branson USA
Find more here
show contacts
Contact us at
show contacts