New MEP Halbautomat Shark 382 SXI evo metal band saw
Niederlangen
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 5939 9...
Show
+49 5939 940640
+49 5939 9...
Show
+49 5939 940650
Germany 
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
saw band length 3320 mm
table height -- mm
330 mm
40 / 80 m/min
3440 x 27 x 0,9 mm
280 mm
260 mm
380 x 260 mm
li 260 mm
li 250 mm
li 300 x 200 mm
re 200 mm
re 180 mm
re 230 x 160 mm
180 mm
170 mm
200 x 170 mm
870 mm
1,5/1,8 kW
0,7 t
total power requirement kW
weight of the machine ca. t
Control modes:
-Manual mode
-Semi-automatic-dynamic operation (the semi-automatic cut is started by
manually approaching the saw bow from any position by actuating the hand switch)
-Semi-automatic operation (start / stop position of the saw bow is programmed
via the keyboard, vice closes / opens automatically, saw bow is automatically
returned to the start of the cut)
Features:
-Stable, torsion-resistant and low-vibration saw frame made of cast steel
- Carbide band guides for maximum cutting precision
-Large dimensioned deflection discs, adjustable made of cast steel
-Large, easily adjustable and mounted turntable, turntable centered by central
axis bolts with indexing at 0 / 45 / 60 and internal table clamp for
intermediate angles. Interchangeable material supports made of steel
-Control panel on vertical post, swiveling, contains all operating elements
-Control with soft-touch keyboard, backlit display for displaying all machine
parameters and messages in plain text, including:
-Number of cuts (piece counter), cutting time, power consumption of the saw
band motor, saw band tension in kg (minimum band tension = 900 kg), saw frame
position (Y-axis), alarms / faults (description and causes), diagnostics ...
-Saw band tension with band tension control and indication on the display by
means of an electronic converter
-Underframe with lockable door
-Large, laterally pull-out chip tray and coolant container with 2 powerful
coolant pumps, flushing nozzle with volume control for removing chips from the
work area
-Coolant gun to clean the machine
-Vise with quick adjustment and exchangeable clamping and stop jaws
-Schipping brush for cleaning the saw band
-Machine is prepared for all options (see price list). (Cables, software etc.)
Standard equipment:
-Bi-metal saw band
-Adjustable length stop 600 mm
Tool kit
-Detailed operating instructions, maintenance manual, circuit diagrams and
exploded views
-Adapter for supply roller conveyor incl. 1 support roller
- Entry option for forklift / pallet truck transport
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.