Müller Martini Tigra perfect binder with Gathering machine 1571 and Esprit trim machining centre
Location:madrid
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
Show
+49 89 38031644
50 Hz
Germany, Location:dresden
Manufacturer
MÜLLER MARTINI
Year of Manufacture
2008
Model
Tigra perfect binder with Gathering machine 1571 and Esprit trimmer
Type of Machine
Binding Machine
Machine Specifications
Mechanical Speed
1000 - 3600 cycles per hour
Book Size (Untrimmed)
Book Spine Length (A)
Max
370 mm (14 ½")
Min
120 mm (4 ¾")
Book Width (B)
Max
285 mm (11 ¼")
Min
100 mm (4")
Book Thickness (C)
Max
40 mm (1 ½")
Min
3 mm (⅛")
Cover Open Dimensions
Spine Length
Max
380 mm (15")
Min
120 mm (4 ¾")
Book Width
Max
620 mm (24 ½")
Min
203 mm (8")
Raceway Clearance of Infeed
60 mm (2 ⅜")
Power Consumption
Basic Equipment
Pre-melter 22 liters (45 lbs.) for Spine Gluing Unit
Pre-melter 4.5 liters (10 lbs.) for Side Gluing Unit
Laydown Device
Air Requirements
Hotmelt Air-Blow
45.0 Nm³/h at 0.6 bar / 27 cfm at 9 psi
Compressed Air
8.0 Nm³/h at 6.0 bar / 5 cfm at 87 psi
Cold Glue Air-Blow
80.0 Nm³/h at 0.6 bar / 47 cfm at 9 psi
Cold Glue Compressed Air
12.0 Nm³/h at 6.0 bar / 7 cfm at 87 psi
Vacuum
12.5 Nm³/h at 60% / 7.5 cfm at 60%
Machine Configuration
Number of Feeder Stations
Max. 24
Number of Clamps
9
Electrical Specifications
Power Input
Voltage
480V
Phase
3PH
Frequency
60Hz
Current
80A
Largest Consumer
Current
13A
Overcurrent Protection
Current
80A
Find more here
show contacts
Contact us at
show contacts