Haas VF0 machining centre
Ramalhal6131 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+351 966 99...
Show
+351 966 999 459
+34 619 02 ...
Show
+34 619 02 07 05
Portugal 
Y axis stroke: 406 mm
Z axis travel: 508 mm
table length: 660 mm
MEASUREMENTS WIDTH: 4136 MM
Table: 1300x700 mm
table width: 355 mm
spindle cone: BT40
Motor power: 15 kW
Tool Magazine: 20 positions
Length: 2286 mm
Width: 2235 mm
spindle power: 22 Kw
Cone type: ISO-40
control: Heidenhain TNC i530
Height: 2286 mm
Work advances: 20mm/min
DEPTH MEASUREMENTS: 2865 MM
table load: 680 kg
iso: 50
Table (X axis): 1020mm
spindle speed: 7500 rpm
mm dimensions: 2300x2200x2115
net weight kg: 2000
Quantity in Stock: 2
Chip extractor: yes
Max. spindle speed: 4000 rpm
Spindle motor power: 22 kw
HEIGHT MEASUREMENTS: 3079 MM
X AXIS MOVEMENT: 1600 MM
Y AXIS MOVEMENT: 920 MM
Z AXIS MOVEMENT: 844 MM
PIECE WEIGHT: 3000 KG
MACHINE WEIGHT: 12000 KG
table size: 60" x 30"
Table Capacity: 3,300 pounds.
X Axis Course: 60″
Y Axis Course: 30″
Z Axis Course: 30″
spindle taper: CAT40
Table dimensions: 1400 x 750 mm
main engine: 15 / 22.5 hp
Electric: 230V/3PH
Saddle (Y axis): 610mm
Head (Z axis): 610 mm
X/Y/Z axis: 1150/700/550 mm
Control unit: Haas
Weight: 3400 kg
Axis displacement: 1200x750x750 mm
Table feed mm/min: Automatic
table rotation: +/-35
kW power: 0.04/0.053
Kw spindle power: 3
piston displacement mm: MANUAL
Ram stroke mm: 600
Vertical slides mm/min: 600
mandrel cone: ISO40
number of speeds: 11
Vertical advance mm/min: 10-168
Transverse feed mm/min: (8) 30-740
Longitudinal advance mm/min: (8) 30 - 740
Transverse slide displacement: 280 mm
Weight on the bench: 2Tn
Fast forward: 30m/min
Number of T-Slots: 5
Auto Mode (Z axis): 36/min
x/y/z acceleration: 6/5/4m/s2
Minimum Increment: 0,001mm
Control: Heidenhain 6951/6951/11519N
X,Y,Z axis speed: 36 m / min
work surface: 1200 x 600mm
Maximum weight on the table: 1500 kg
Maximum height on the table: 820 mm
Minimum spindle speed: 20 rpm
Maximum spindle speed: 12,000 rpm
Max spindle power: 14,5 kW
Maximum spindle torque: 121 Nm
Tool storage capacity: 20 pcs.
Maximum tool diameter: 80 mm
Maximum tool length: 300 mm
total machine weight: 8800 kg
Quantity in Stock: 2
course x: 1300 MM
course y: 400 MM
course z: 500 MM
T-slots: 3x14 mm
Longitudinal course: 1000 mm
HAAS VF0 vertical machining center. Working at full capacity.
Curso do eixo X: 508 mm
Curso do eixo Y: 406 mm
Curso do eixo Z: 508 mm
Comprimento da mesa: 660 mm
Largura da mesa: 355 mm
Carga da mesa: 680 kg
Velocidade do fuso: 7500 rpm
Cone do fuso: BT40
Potência do motor: 15 kW
Magazine de ferramentas: 20 posições
Comprimento: 2286 mm
Largura: 2235 mm
Altura: 2286 mm
Peso: 3400 kg
Centro de maquinação vertical HAAS VF0. A trabalhar em pleno.