Gildemeister GMX 300 linear SL machining centre
Berlin
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
+49 89 38031644
Germany, Location:stuttgart
Germany, Stuttgart
Germany, Munich
Germany, Gräfelfing
Germany, Gräfelfing
Germany, Gräfelfing
Germany, Location:munich
Germany, Freiburg im Breisgau
Germany, Location:augsburg
Germany, Dresden
Manufacturer
Gildemeister
Model
GMX 300 linear
Year of Manufacture
2007
Total Power Requirement
100 kVA
Voltage
400 V
Machine Weight
24,000 kg
Floor Space Required
60 m2
Working Range
Centre height: 1,343 mm
Maximum turning diameter: 640 mm
Maximum turning length: 1,930 mm
Maximum turning length over bed: 550 / 180 mm
Slide travel longitudinal X1
X2: 1,585 / 1,400 / 1,500 mm
Slide travel vertical Y: plus/minus 110 mm
B-axis: plus/minus 120 degrees
Maximum circumference: 640 mm
Length of workpiece in crown area: not specified
Maximum workpiece weight: not specified
Spindle Specifications
Spindle head flat flange DIN: Flachflansch
Spindle nose diameter front bearing: 220h5 mm
Spindle bore diameter: 107 mm
Spindle nose diameter: 150 mm
Max. chuck bore diameter in front bearing: 250 / 315 / 400 mm (internal taper)
Spindle speed HSP: 3,200 / 4,000 min-1
Spindle speed GSP: up to 4,000 min-1
Main Drive System
Main spindle motor (HSP): Kessler ISM
36/45 kW
120 A
3,200/4,000 min-1
IP23
Counter spindle motor (GSP): Kessler ISM
22 A
12,000 min-1
IP54
Z1-axis linear motor (WZSP1): Siemens 1FN3900
50 A
IP65
Z2-axis linear motor: Siemens 1FK6060
10.4 A
3,000 min-1
IP64
Z3/X1/B-axis linear motor: Siemens 1FK6083
7.9 A
3,000 min-1
IP64
Magazine Z-axis motor: Siemens 1FK6083
7.9 A
3,000 min-1
IP64
WZ-Antrieb WZ2: Siemens 1FT6084
24.8 A
4,500 min-1
IP64
Feed Rates and Rapid Traverse
Rapid traverse speed longitudinal (max): 86 m/min
Rapid traverse speed cross (max): 7 m/min
Maximum clamping force at cutting speed: 7.5 kN for St 60
Maximum clamping force at GQ 20: cross section in mm2
Gear and Thread Cutting
Thread pitch metric: 1/32 to 1/92 mm/rev
Thread pitch Whitworth: 1/32 to 1/92 threads per inch
Thread pitch modular: 1/5 to 1/9 module
Feed per revolution (milling): 1/5 to 1/9
Screw pitch force at Z: 7.5 kN / Z: 11 kN / Z: 11 kN
Entry force at Z: 65 / Z: 40 / Z: 40
Number of feed steps: stepless up to 4,000 U/min
Gearbox: stepless
Tailstock
Tailstock
quill travel: Z1=1,585 / Z2=1,400 / Z3=1,500 mm
Face plate: yes
Number of face plate tools: 3
Number of driven tools: up to 4 (Planhub)
X1=550 / X2=180 mm
Pinolenkegel: MK5
Max. pinion hub travel (hand/self-acting): 84 mm
Max. tailstock travel (hand/self-acting): 1,500 mm
Support and Tooling
Tool system: Scheb
Reu
WZ-Spindel
Meisselquerschnitt
Max. torque: 600/750 Nm
Number of tool stations (Planscheiben): up to 2
Spindle nose 1 front bearing: 150 mm
Max. chuck bore: 250 / 315 / 400 mm
Spindle head according to DIN: Flachflansch
Hydraulics and Ancillaries
Hydraulics: Rexroth
5.5/6.6 kW
10.9 A
IP54
Coolant: Brinkmann
0.8 A
IP54
Lubrication: Vogel
0.4 A
Speed range: up to 4,000 U/min
Gearbox stages: I
II
III (stepless up to WZSP/GSP)
Find more here
show contacts
Contact us at
show contacts