Hauser S40 - 400 jig grinding machine
SAINT-GENIX-LES-VILLAGES
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+33 4 86 11...
Show
+33 4 86 11 77 77
50 Hz
Germany, Location:stuttgart
50 Hz
Switzerland, Brugg
TECHNICAL CHARACTERISTICS :
Stroke X axis : 650 [mm]
Max. Stroke speed X axis : 4000 [mm/min]
Working feed X axis : 0 - 1800 [mm/min]
Stroke Y axis : 450 [mm]
Working feed Y axis : 0 - 1800 [mm/min]
Stroke Z axis : 130 [mm]
Min. Stroke speed Z axis : 0.5 [mm/min]
Max. Stroke speed Z axis : 12000 [mm/min]
Stroke frequency Z axis : max. 4 [Hz]
Stroke W axis : 500 [mm]
Planetary speed C axis : 5 - 250 [rpm]
Max. Stroke speed W axis : 800 [mm/min]
Stroke U axis (radial feed) : 5.5 [mm]
Distance between columns : 750 [mm]
Table length : 770 [mm]
Table width : 630 [mm]
Clearance between grinding motor and table : 585 [mm]
Max. load on table : 500 [Kg]
Supply voltage : 400 [V]
Weight : 4550 [Kg]
EQUIPMENT INCLUDED:
x1 HI-CUT pack including:
-work area protection
-exhaust system with electrostatic air filter
-fire protection system (to be assessed by a qualified body)
-automatic paper tape filtration unit
x1 grinding motor 22 S, speed 4500 - 22500 [rpm], for EX23 collets - part number: 181561
x1 45 S grinding motor, speed 9000 - 4500 [rpm], for EX19 collets - reference: 144017
x1 80 S grinding motor, speed 40000 - 80000 [rpm], for F6 collets - reference: 144021
x1 grinding motor for slot grinding (motor + belt are included) - reference: 144022
x3 grinding tools for slot grinder
x1 set of belts for slot grinding motor
x1 intermediate plate for alignment of grinding motors - reference: 192940
x1 infinitely adjustable cantilever plate with mounted grinding motor for grinding up to Ø360 [mm] - reference: 144023
x1 adjustable plate, for tilting grinding motors and turbines (up to 16°) - reference: 126148
x1 set of 2 HAUSER 90° angle brackets - reference: 155361
x1 centring microscope - reference: 146318
x1 tool contact detection device - reference: 162334
x20 grinding wheel holders
x1 cable for grinding motor
Various tools
Complete documentation
Machine visible under power in our premises by appointment.
Price on request, loading on truck included.
Possibility of shipping Worldwide.
The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.
CARACTÉRISTIQUES TECHNIQUES :
Course axe X : 650 [mm]
Vitesse maxi. course axe X : 4000 [mm/min]
Vitesse avances de travail axe X : 0 - 1800 [mm/min]
Course axe Y : 450 [mm]
Vitesse avances de travail axe Y : 0 - 1800 [mm/min]
Course axe Z : 130 [mm]
Vitesse mini. course axe Z : 0.5 [mm/min]
Vitesse maxi. course axe Z : 12000 [mm/min]
Fréquence course axe Z : max. 4 [Hz]
Course axe W : 500 [mm]
Vitesse axe C (planétaire) : 5 - 250 [rpm]
Vitesse maxi. course axe W : 800 [mm/min]
Course axe U (avance radiale) : 5.5 [mm]
Distance entre colonnes : 750 [mm]
Longueur table : 770 [mm]
Largeur table : 630 [mm]
Passage libre entre le moteur de meulage et la table : 585 [mm]
Poids maxi. admissible sur la table : 500 [Kg]
Tension d'alimentation : 400 [V]
Poids : 4550 [Kg]
ÉQUIPEMENTS INCLUS:
x1 pack HI-CUT comprenant:
-protection de la zone de travail
-dispositif d'évacuation avec filtre à air electrostatique
-dispositif de protection contre les incendies (à soumettre à l'expertise d'un organisme qualifié)
-unité de refroidissement avec filtre à bande automatique HTG-RWS-60
x1 dispositif de détection d'outil
x1 moteur de meulage 22 S, vitesse 4500 - 22500 [tours/min], pour pinces EX23 - référence: 181561
x1 moteur de meulage 45 S, vitesse 9000 - 4500 [tours/min], pour pinces EX19 - référence: 144017
x1 moteur de meulage 80 S, vitesse 40000 - 80000 [tours/min], pour pinces F6 - référence: 144021
x1 moteur de meulage pour rectification de rainures (moteur + courroie sont inclus) - référence: 144022
x3 outils de meulage pour appareil à rectification de rainures
x1 lot de courroies pour moteur de meulage pour rectification de rainures
x1 plaque intermédiaire pour l'alignement des moteurs de rectification - référence: 192940
x1 plaque en porte-à-faux réglable en continu avec moteur de meulage monté pour meulage jusqu'à Ø360 [mm] - référence: 144023
x1 plaque à calles, réglable, pour l'inclinaison des moteurs de meulage et turbines (jusqu'à 16°) - référence: 126148
x1 lot de 2 équerres HAUSER - référence: 155361
x1 microscope de centrage - référence: 146318
x1 appareil à détection de contact - référence: 162334
x20 tasseaux porte-meule
x1 câble pour moteur de meulage
Divers outillages
Documentation complète
Machine visible sous tension pour essais en nos locaux, sur RDV.
Prix HT sur demande, chargement sur camion inclus.
Possibilité d’expédition dans toute la France ainsi qu’à l'international.
Plus de photos et détails sur demande.
Descriptif technique à titre indicatif, sans engagement de notre part.