HPV102GW-RH23D 9201020 9191179 hydraulic pump for Hitachi ZX225US ZX225USR excavator
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+86 199 246...
Show
+86 199 2461 6345
China
China
China
China
China
China
China
China
China
China
China
China
China
China
China
China
China
China
China
Hitachi HPV118HW-25A 9275341 9274600 hydraulic pump for Hitachi ZX210W-3 ZX220W-3 ZX250W-3 excavator
China
The RH23D variant is specifically calibrated for the reduced tail-swing geometry of the following models:
Primary Machine Fitment:
Hitachi ZX225US (Ultra Short)
Hitachi ZX225USR (Ultra Short Radius)
Hitachi OEM Part Numbers:
9201020
9191179
Condition: Original Brand New / OEM Specification.
2. Technical Specifications & Design
This pump is part of the HPV series, known for its ability to handle high-duty cycles in construction and demolition.
Type: Tandem Variable Displacement Axial Piston Pump.
Control System: Features the RH23D regulator, which is uniquely tuned to provide smooth flow-sharing. This allows the operator to boom up, arm in, and swing simultaneously without the machine feeling "heavy" or sluggish.
Compact Housing: Engineered to fit within the narrow engine compartment of the ZX225US without sacrificing displacement or cooling efficiency.
Pressure Rating: Rated for 34.3 MPa (343 bar) with a peak power-boost capability.
3. Why Choose the Original/OEM Brand?
For the ZX225 series, the pump is the most critical component for maintaining "feel" and safety in tight spots:
Micro-Precision Control: When working inches away from walls or traffic, you need exact joystick-to-pump response. Original pumps utilize precision-lapped valve plates that prevent the "jerky" movement common in low-quality aftermarket clones.
Engine Power Matching: The RH23D regulator is factory-set to the torque curve of the Isuzu engine. This prevents engine "bogging" or stalling when the hydraulic system hits maximum load.
Metallurgical Durability: Original units use high-silicon alloy cylinder blocks that resist heat-soak and cavitation, ensuring the pump lasts 10,000+ hours with proper maintenance.
4. Critical Installation Protocol
To protect your investment and ensure a successful installation, please follow these expert steps:
Case Priming (Mandatory): Fill the pump housing with clean hydraulic oil through the highest case drain port before starting the engine. Running the pump "dry" for even 5 seconds will cause the piston shoes to weld to the swash plate.
System Decontamination: If the previous pump failed mechanically (shrapnel in the system), you must flush the hydraulic tank and clean the oil cooler.
Filtration: Install a new suction strainer and high-pressure return filter (Genuine Hitachi 10-micron). Use ISO VG46 anti-wear oil.
Air Purge: Run the engine at low idle for 10 minutes. Slowly cycle all cylinders to their limits to purge air before performing any heavy work.
5. Frequently Asked Questions (FAQ)
Are 9201020 and 9191179 fully interchangeable?
Yes. 9201020 is generally the more recent engineering revision. Both are designed for the ZX225US/USR series and share identical mounting and performance specs.
How do I identify a genuine OEM pump?
Look for the data plate featuring the Hitachi or Hitachi Astemo (Nachi/Unisia) logo. Genuine units will have clean, precision-machined port faces and high-quality protective shipping plugs.
How long does shipping take?
We prioritize "Machine Down" orders. Global express shipping via DHL, FedEx, or UPS usually takes 3 to 7 business days to arrive at your site.
Does the pump come with the solenoid valves?
Yes, our Original/OEM Brand New pumps are sold as complete assemblies, including the pre-calibrated regulators and proportional solenoid valves.