New Hydraulischer Planierlöffel HDB1 für Minibagger (1–2 Tonnen) grading bucket
München
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+359 87 625...
Show
+359 87 625 5380
+49 1511 10...
Show
+49 1511 1047746
Germany 
Germany, Munich
Germany, Glinde
Germany, Munich
Germany, OsterrÖNfeld
Germany, Kolkwitz-Krieschow
Germany, Bielefeld
Germany, Wei&Szlig;Enhorn
Germany, Glinde
Germany, Halver
Germany, OsterrÖNfeld
Germany, Halver
Germany, Halver
Germany, Baienfurt
Germany, Baienfurt
Germany, Grossenaspe
Germany, Kleve
Germany, 76287 Rheinstetten
Germany, Halver
Germany, Crailsheim
Germany, Baienfurt
Robust and versatile solution for precise grading work – direct from the manufacturer.
Available widths and prices (excl. VAT):
Width [mm] | Price (S355) [€] | Price (HB400) [€]
800 mm – 517.00 € – 664.00 €
900 mm – 540.00 € – 694.00 €
1000 mm – 568.00 € – 731.00 €
1100 mm – 591.00 € – 761.00 €
1200 mm – 620.00 € – 798.00 €
Mounting systems (surcharges excl. VAT):
Lehnhoff MS01 – no surcharge
Lehnhoff MS01-HT – +24.00 €
Verachtert CW00 – no surcharge
Verachtert CW05 – +24.00 €
Pin system – +35.00 €
SW10, M03, CM30 – +12.00 €
Without mounting – discount: -35.00 €
Features and Benefits:
Hydraulic tilting function for maximum flexibility on site – allows tilting, grading, and versatile work in all directions.
Robust design made from high-strength S355J2+N steel or wear-resistant HB500 steel for demanding applications.
High resistance to wear, shocks, and heavy loads.
Compatible with common quick coupler systems – can be individually adapted to your machine.
Suitable for versatile applications: landscaping, gardening, construction, earthmoving, and more.
Side wear edges made of 8 mm S355J2+N steel for extra stability and durability.
Reinforced cutting edge made of HB500 steel (150×16 mm) – ensures precise cutting even in hard ground.
Primed and painted – protection against corrosion and weather influences.
Integrated lifting lugs for easy and safe handling.
1-year warranty on all weld seams.
Our product range – Excavator buckets direct from the manufacturer
With over 15 years of experience in metalworking and bucket production, we offer:
Wide range of standard models – compatible with leading excavator brands.
Tailor-made solutions – individually manufactured to customer specifications.
Maximum reliability – made from high-quality materials for long service life.
Competitive prices – optimal balance between quality and cost.
Modern production and experienced team – fast manufacturing and professional support.
Contact us
We are happy to advise you personally and prepare an offer tailored to your requirements.
We supply grading buckets for excavators from 1 to 2 tons in various designs.
Предлагаме и следните размери (ширина) в мм за този продукт:
Ширина [мм]: Цена без ДДС [€] (S355) : Цена без ДДС [€] (HB400)
800 мм | 517.00 € | 664.00 €
900 мм | 540.00 € | 694.00 €
1000 мм | 568.00 € | 731.00 €
1100 мм | 591.00 € | 761.00 €
1200 мм | 620.00 € | 798.00 €
Захватни системи: Цена към кофата според захватната система без ДДС
Lehnhoff MS01 (без промяна)
Lehnhoff MS01-HT +24.00 €
Verachtert CW00 (без промяна)
Verachtert CW05 +24.00 €
Щифтова система +35.00 €
SW10, M03, CM30 +12.00 €
Без захватна система -35.00 €
Характеристики и предимства:
Хидравлична функция – максимална гъвкавост при работа с багера, позволяваща както дълбоко, така и високо копаене и изкопаване.
Здрава конструкция от високоякостни стомани S355J2+N и износоустойчив HB500.
Висока устойчивост на износване, удари и натоварвания, подходяща за интензивни работни условия.
Гъвкави възможности за захващане – съвместимост с различни захватни системи и адаптери, за максимална съвместимост с различни марки и модели багери.
Подходяща за разнообразни приложения – идеална за градинско и ландшафтно строителство, както и за по-тежки строителни и изкопни работи.
Износоустойчиви странични ръбове – изработени от 8 мм стомана S355J2+N за защита срещу абразия и удари.
Усилена резачка – с размери 150×16 мм от HB500 стомана за прецизни изкопи и ефективно копаене дори в твърда почва.
Висококачествено покритие – грундиране и боядисване за надеждна защита срещу корозия.
Транспортни куки – интегрирани за лесно и безопасно транспортиране на кофата.
Гаранция – 1 година за всички заварки.
Нашата продуктова гама: Кофи за багери
С повече от 15 години опит в производството на кофи за багери, ние предлагаме:
Широк избор – стандартни модели, съвместими с всички водещи марки машини.
Индивидуални решения – изработка по спецификация спрямо конкретните Ви нужди.
Надеждност и здравина – продукция от първокласни материали, гарантираща дълъг експлоатационен живот.
Конкурентни цени – оптимално съотношение между качество и стойност.
Разполагаме със съвременна производствена база и екип от специалисти, готови да Ви съдействат при всяко запитване. Ако търсите качество, сигурност и професионализъм – ние сме Вашият партньор.
Не се колебайте да ни потърсите!
Разполагаме с широка гама от размери за багери от 1 до 2 тона.
Robuste und vielseitige Lösung für präzise Planierarbeiten – direkt vom Hersteller.
Verfügbare Breiten und Preise (inkl. MwSt.):
Breite [mm] Preis (S355) [€] Preis (HB400) [€]
800 mm 517,00 € 664,00 €
900 mm 540,00 € 694,00 €
1000 mm 568,00 € 731,00 €
1100 mm 591,00 € 761,00 €
1200 mm 620,00 € 798,00 €
Aufnahmesysteme (Aufpreis inkl. MwSt.):
Lehnhoff MS01 – ohne Aufpreis
Lehnhoff MS01-HT – +24,00 €
Verachtert CW00 – ohne Aufpreis
Verachtert CW05 – +24,00 €
Bolzensystem (Pin) – +35,00 €
SW10, M03, CM30 – +12,00 €
Ohne Aufnahme – Rabatt: -35,00 €
Merkmale und Vorteile
Hydraulische Kippfunktion für maximale Flexibilität auf der Baustelle – ermöglicht Neigung, Planieren und vielseitiges Arbeiten in alle Richtungen.
Robuste Bauweise aus hochfestem S355J2+N-Stahl oder verschleißfestem HB500-Stahl für anspruchsvolle Einsätze.
Hohe Widerstandsfähigkeit gegenüber Verschleiß, Stößen und schweren Belastungen.
Kompatibel mit gängigen Schnellwechselsystemen – individuelle Anpassung an Ihre Maschine möglich.
Geeignet für vielseitige Anwendungen: Garten- und Landschaftsbau, Bauarbeiten, Erdbewegung u. v. m.
Seitliche Verschleißkanten aus 8 mm S355J2+N-Stahl für zusätzliche Stabilität und Langlebigkeit.
Verstärkte Schneidkante aus HB500-Stahl (150×16 mm) – für präzises Schneiden auch bei harten Böden.
Grundiert und lackiert – Schutz gegen Korrosion und Witterungseinflüsse.
Integrierte Transportösen für einfache und sichere Handhabung.
1 Jahr Garantie auf alle Schweißnähte.
Unsere Produktpalette – Baggerlöffel direkt vom Hersteller
Mit über 15 Jahren Erfahrung in der Metallverarbeitung und Löffelproduktion bieten wir:
Große Auswahl an Standardmodellen – kompatibel mit führenden Baggermarken.
Maßgeschneiderte Lösungen – individuell gefertigt nach Kundenspezifikation.
Höchste Zuverlässigkeit – gefertigt aus hochwertigen Materialien für lange Lebensdauer.
Faire Preise – optimales Verhältnis zwischen Qualität und Kosten.
Moderne Produktion und erfahrenes Team – schnelle Fertigung und kompetente Beratung.
Kontaktieren Sie uns
Gerne beraten wir Sie persönlich und erstellen ein Angebot entsprechend Ihrer Anforderungen.
Wir liefern Planierlöffel für Bagger im Bereich von 1 bis 2 Tonnen in verschiedenen Ausführungen.