Leadermac HYPERMAC 930 four sided planer
Wijchen
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+31 6 114...
Show
+31 6 11462913
+31 6 148...
Show
+31 6 14832789
+31 6 558...
Show
+31 6 55855207
Netherlands 
Netherlands, Wijchen
Netherlands, Wijchen
Netherlands, Wijchen
Netherlands, Wijchen
Netherlands, Wijchen
Netherlands, Wijchen
Netherlands, Wijchen
Netherlands, Wijchen
Netherlands, Wijchen
Netherlands, Wijchen
Netherlands, Wijchen
Netherlands, Hardinxveld-Giessendam
Netherlands, Hardinxveld-Giessendam
Netherlands, Hardinxveld-Giessendam
Netherlands, Hardinxveld-Giessendam
Netherlands, Rotterdam
Netherlands, Hardinxveld-Giessendam
Netherlands, Rotterdam
Netherlands, Hardinxveld-Giessendam
Netherlands, Hardinxveld-Giessendam
- Documentation available: Yes
- └ Type Documentation: User manual, Operating system, Technical data, Electrical diagrams
- CE marking present: Yes
- CE certificate present: Yes
- Serial number: 2010016
- Number of spindles [pcs.]: 9
- └ Spindle 1:
- - Spindle type: Bottom
- - Motor power [kW]: 11
- - Spindle diameter [mm]: 50
- - Cutterhead speed [rpm]: 6000
- - Tool present: Yes
- └ Spindle 2:
- - Spindle type: Right
- - Motor power [kW]: 11
- - Spindle diameter [mm]: 50
- - Cutterhead speed [rpm]: 6000
- - Tool present: Yes
- └ Spindle 3:
- - Spindle type: Left
- - Motor power [kW]: 11
- - Spindle diameter [mm]: 50
- - Cutterhead speed [rpm]: 6000
- - Tool present: Yes
- └ Spindle 4:
- - Spindle type: Top
- - Motor power [kW]: 15
- - Spindle diameter [mm]: 50
- - Cutterhead speed [rpm]: 6000
- - Tool present: Yes
- └ Spindle 5:
- - Spindle type: Right
- - Motor power [kW]: 11
- - Spindle diameter [mm]: 50
- - Cutterhead speed [rpm]: 6000
- - Tool present: Yes
- └ Spindle 6:
- - Spindle type: Left
- - Motor power [kW]: 11
- - Spindle diameter [mm]: 50
- - Cutterhead speed [rpm]: 6000
- - Tool present: Yes
- └ Spindle 7:
- - Spindle type: Top
- - Motor power [kW]: 11
- - Spindle diameter [mm]: 50
- - Cutterhead speed [rpm]: 6000
- └ Spindle 8:
- - Spindle type: Bottom
- - Motor power [kW]: 15
- - Spindle diameter [mm]: 50
- - Cutterhead speed [rpm]: 6000
- - Tool present: Yes
- └ Spindle 9:
- - Spindle type: Universal
- - Motor power [kW]: 11
- - Spindle diameter [mm]: 50
- - Cutterhead speed [rpm]: 6000
- - Tool present: Yes
- Min. planing width [mm]: 20
- Max. planing width [mm]: 300
- Min. planing height [mm]: 10
- Max. planing height [mm]: 200
- Feed speed: Automatic
- └ Min. feed speed [m/min]: 6
- └ Max. feed speed [m/min]: 36
- Transport dimensions: 7100mm x 2200mm x 1900mm (l x w x h)
- Transport weight [kg]: 12000kg
- Transport packages [pcs.]: 1
Financial information
VAT: The price shown is exclusive of VAT
VAT/margin: VAT deductible for entrepreneurs
Delivery and trade-in always possible for everything in the industrial sectors
Glenn Smeets
show contacts
= More information =
Year of manufacture: 2021