CR Electronic Square air ducts production line decoiler
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+32 9 386 ...
Show
+32 9 386 15 71
+32 9 386 ...
Show
+32 9 386 99 41
+32 492 27 ...
Show
+32 492 27 72 80
+32 9 386 ...
Show
+32 9 386 15 71
Belgium 
Belgium, Deinze
Belgium, Deinze
Belgium, Deinze
Belgium, Deinze
Belgium, Deinze
Belgium, Deinze
Belgium, Deinze
Belgium, Deinze
Belgium, Deinze
Belgium, Deinze
Belgium, Deinze
Belgium, Deinze
Belgium, Deinze
The STRADA is a system for the automated production of complete rectangular air conditioning ducts
The system makes it possible to manufacture complete,high quality ducts quickly and efficiently since production is digitally controlled
The plate from the coil is flattened
ribbed
notched and cut to size. The system then forms the Pittsburgh or snap-lock overlaps. The FLAROM unit then flanges the ducts. The plate is then bent to size to shape the duct
Manual assembly of the flange accessories and longitudinal overlap closings complete the process
1 - Decoiler
Reels for 5000 kg or 8000 kg coils
2 - Automatic feeder/selector
Unit to select and start automatic machining of plate from one of the 4 available coils. This unit avoids having the operator manually insert the plate into the machine when working with different thicknesses
3 - Flattening Unit
A sturdy
electronically controlled 9 roller flattening unit feeds the plate into the system
4 - Ribbing Unit
With a series of rollers this unit creates ribs that increase the duct's stiffness
5 - Punching Unit
This machine
consists of a hydraulic control unit and four punches (two on each side of the plate) and makes the triangular and rectangular notches needed for the next phases of edge-forming and bending
6 - Roll Former for Longitudinal Overlaps
This unit consists of a 9 station roll former (with Pittsburgh rollers) mounted on a carriage that moves on a track. It makes seam pockets on the longitudinal overlaps quickly and accurately
7 - Double Station for Flanging on the Duct
Two Flarom type presses
one on each side of the plate make a flanged profile directly on the duct
8 - Digitally Controlled Bending Unit
This electronically controlled bending unit accurately bends the plate to size
9 - Digital Control Unit
A control console
complete with monitor
designed and built by CR Electronic makes it possible to program and control all phases of the Strada System's operations. A link with a personal computer makes it possible to transmit programs directly from the engineering department
FLAROM Type Flange Unit
The FLAROM flange system
patented by CR Electronic
makes the flanged profile directly on the duct
The system consists of two Flarom type presses
one on each side of the plate. Each press makes a flange profile using a sophisticated
microprocessor controlled hydraulic system (four controlled axes)
nbsp
The FLAROM type flange offers considerable advantages when compared with traditional flanges to mount on the duct
gt
reduction of labor needed for assembly
gt
reduction of bar and accessories (rivets
screws
etc.) inventories
gt
reduction of time needed to mount the flange (only the corners have to be mounted)
gt
excellent air-tightness for the completed duct
gt
safety (the FLAROM is CE certified)
Material thickness x width: 1,5 х 2000 mm
Length x width over all: 15100 x 6100 mm
DECOILER(s): 3 units
Min -- max dia coil: 400 > 540 mm
Max weight admit: 5 ton
STRAIGHTENER(s): yes
Feedingrolls (dia x W): 2x
Flattingrolls (dia x W): 7x (dia 100 mm)