New TyreON TL75-4 30T mobile truck lift - wired - 400V - performance 3,0 kW 4 post car lift

Total Capacity 30 tons - Wired
Mobile Columns 4 - 7500 kg per column
Lift range / time 0 - 180 cm /
Operation 400V electric-hydraulic
► Mobile
► Wired - interconnected
► Auto-stop at 30 cm height
► Control from any column
► Main column with LCD display and remote control
► Fully automatic - electrically unlocked
► Electronic synchronization control
► Hydraulic check valve
► Cover over pump unit and integrated control panel
Lock button Descend into lock
Slowdown button Slow descend on axle supports
Lifting forks Distance is adjustable
Free connection 2 ,4 ,6 ..........12 columns
Voltage 400V
Transport 1 Column L140 x W115 x H225 cm - 640 kg
Equipped with Pallet truck mechanism and forklift points and lifting eye
Synchronous function Lifting/lowering with forks at different heights
CE approved EC type examination certificate
EN 1493:2010 vehicle lifts
Hydraulic oil not included 60 Liter TyreON HV-ISO-32 is optional
The hydraulic TyreON TL75 mobile truck lifts are moved like a pallet truck and can be used on paved flat grounds, indoors and outdoors.
Perfect for lifting trucks and buses.
Easy to operate using a large display showing the status of various functions of the mobile truck lift.
TyreON TL75-4 30T - 4 mobile lifting columns with control panel
This mobile truck lift consists of 4 lifting columns with a total lifting capacity of 30,000 kg.
Each column is equipped with a 2.2 kW hydraulic power unit.
This lifting system can be operated from any lifting column.
The main column comes with a large LCD display and a self-diagnosis system with error codes.
All columns stop immediately if an error is detected.
Each lifting column can be controlled individually, by two or by all lifting columns simultaneously.
Hydraulic technology - easy to maintain
TyreON markets the TL75 hydraulic truck lift, leaving the old spindle- and chain-driven systems far behind. With microprocessor and proprietary software for smooth and synchronous lifting and lowering of heavy vehicles, even if the load is unevenly distributed.
All system parameters including the lifting height of each column are permanently displayed on the main column. This technology is characterised by very low maintenance and high lifting speed.
Features - Mobile column lifting truck
With a pallet truck mechanism each lifting column is mobile
Adjustable forks for wheels for different tyre-diameters
A switch on the main column to optionally control 1, 2 or all columns 
Powder-coated finish
Heavy duty bearings and a heavy-duty locking hook in each lifting column
Comes with central lifting eye and forklift pockets
Advantages
Robust, simple and easy to maintain
No complicated structural adaptations required
Mobile and flexible, the TL75 can be used both indoors and outdoors
Can be safely used on a flat, stable surface
Free connection, combinations of up to 12 columns possible, very simple programming
Safety - Mobile column lifting truck
Truck lift with double safety system
1- Hydraulic check valves prevent sudden lowering in case of leakage or damage to the hydraulic system
2- Automatic mechanical safety hook every 3,5 cm with electromagnetic release
Auto-stop at 30 cm height - press the button again to continue
A pressure relief valve prevents damage to the cylinder, pump or structure in case of overloading
Self-calibration and self-diagnosis system with error-code system
The columns stop immediately if a height-difference of 5 cm is detected
All columns stop immediately if any failure is detected. 
Emergency stop on each column as well as an optical and acoustic signal
Procedure to lower the lift in case of a power-shut-down
IP54 electrical enclosure
TL75-4 30T mobile truck lift - wired - 400V - performance 3,0 kW per column - large display - lifting time Request a quote