Emco TURN345II metal lathe for sale by auction
Boxberg
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€1,600
≈ $1,889
Germany, Velbert
€1,500
≈ $1,771
Germany, Weilheim Teck
€7,500
≈ $8,855
Germany, Haiger
€9,500
≈ $11,220
Germany, Schöffengrund
€7,900
≈ $9,328
Germany, Weilheim Teck
€9,500
≈ $11,220
Germany, Schöffengrund
€10,000
≈ $11,810
Germany, Schöffengrund
€14,900
≈ $17,590
Germany, Boxberg
€15,000
≈ $17,710
Germany, Langgöns
€5,000
≈ $5,904
Germany, Huisheim
€3,500
≈ $4,132
Germany, Huisheim
€5,000
≈ $5,904
Germany, Brand-Erbisdorf
€4,500
≈ $5,313
Germany, Bad Oeynhause
€3,500
≈ $4,132
Germany, Huisheim
€12,900
≈ $15,230
Germany, Falkenberg
€20,000
≈ $23,610
Germany, Schöffengrund
€5,000
≈ $5,904
Germany, Huisheim
€5,000
≈ $5,904
Germany, Brand-Erbisdorf
€650
≈ $767.50
Germany, Villingen-Schwenningen
€950
≈ $1,122
Germany, Schöneck
Operating voltage: 400 V
Frequency: 50-60Hz
Rated current: 33 A
Control: SIEMENS SINUMERIK 840 D
Travel:
Z-axis approx. 500 mm
X-axis approx. 200 mm
Incl. 12-cavity tool turret
Tool holder: VDI 30
Attention: without the tool holders
on the turret
Incl. tailstock and three three-jaw chucks (diameter: 160 mm)
Attention: without the loading robot
that may be seen in the photos
Incl. chip conveyor
Betriebsspannung: 400 V
Frequenz: 50-60 Hz
Nennstrom: 33 A
Steuerung: SIEMENS SINUMERIK 840 D
Verfahrweg:
Z-Achse ca. 500 mm
X-Achse ca. 200 mm
Inkl. 12-fachem Werkzeugrevolver
Werkzeugaufnahme: VDI 30
Achtung: ohne die auf dem Revolver befindlichen Werkzeugaufnahmen
Inkl. Reitstock sowie drei Dreibackenfutter (Durchmesser: 160 mm)
Achtung: ohne dem auf den Fotos möglicherweise zu sehende Belade-Roboter
Inkl. Späneförderer
Fabrikationsnummer: R2AT0402
Betriebsspannung: 400 V
Frequenz: 50-60 Hz
Nennstrom: 33 A
Steuerung: SIEMENS SINUMERIK 840 D
Werkzeugaufnahme: VDI 30
Achtung: ohne die auf dem Revolver befindlichen Werkzeugaufnahmen
Inkl. Reitstock sowie drei Dreibackenfutter (Durchmesser: 160 mm)
Länge: 4000
Höhe: 2200
Breite: 1800
Verfahrweg
Z-Achse ca. 500 mm
X-Achse ca. 200 mm
Inkl. 12-fachem Werkzeugrevolver
Achtung: ohne dem auf den Fotos möglicherweise zu sehende Belade-Roboter
Inkl. Späneförderer
Tension de fonctionnement : 400 V
Fréquence : 50-60 Hz
Courant nominal : 33 A
Contrôle : SIEMENS SINUMERIK 840 D
Voyager:
Axe Z env. 500 mm
Axe X env. 200 mm
Avec tourelle d’outil à 12 cavités
Porte-outil : VDI 30
Attention : sans les porte-outils
sur la tourelle
Avec poupée mobile et trois mandrins à trois mors (diamètre : 160 mm)
Attention : sans le robot de chargement
que l’on peut voir sur les photos
Incl. convoyeur de copeaux
Tensione di esercizio: 400 V
Frequenza: 50-60Hz
Corrente nominale: 33 A
Controllo: SIEMENS SINUMERIK 840 D
Viaggio:
Asse Z circa 500 mm
Asse X circa 200 mm
Incl. torretta
portautensili a 12 cavità
Portautensili: VDI 30
Attenzione: senza i portautensili
sulla torretta
Incl. contropunta e tre mandrini a tre griffe (diametro: 160 mm)
Attenzione: senza il robot di caricamento
che si vede nelle foto
Incl. trasportatore di trucioli
Bedrijfsspanning: 400 V
Frequentie: 50-60Hz
Nominale stroom: 33 A
Besturing: SIEMENS SINUMERIK 840 D
Reizen:
Z-as ca. 500 mm
X-as ca. 200 mm
Incl. 12-voudige gereedschapsrevolver
Gereedschapshouder: VDI 30
Let op: zonder de gereedschapshouders
op de revolver
Incl. losse kop en drie klauwplaten (diameter: 160 mm)
Let op: zonder de beladingsrobot
die op de foto's te zien is
Incl. spanentransporteur