New Sprigholly Industrial Plasma Cutter CNC 50A Non Touch Pilot Arc Low Frequen welding machine

【PERFORMANCE】 Automatic 110/220V DC Dual Voltage. 15-55 A DC output, 3/5”(15mm) ideal clean cut and 1” maximum severance cut under 220V. 10-35A DC output, 3/8"(9mm) ideal clean cut and 1/2"(12mm) maximum severance cut under 110V.

【CNC connection】This machine can be connected to a small CNC machine tool for cutting. Convenient operation and intelligent cutting. CNC ENABLED Pre-installed CNC Interface with THC (Torch Height Controller) signal output. Non-HF Blowback Start, there is no HF interference on your CNC computer.

【Fully Output Circuit Breaker Requiement】 110V @ 50A and 220V @ 30A. Air Compressor Requirement: 70 PSI @ 4.0SCFM. suitable cutting for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Non-touch Low Frequency pilot arc technology: efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.

【Fast cutting in only three steps】Built-in automatic drain air regulator, you only need to connect the air compressor, plug in the power supply and the plasma cutting torch, and you can start working. And there is no need to worry about drainage and regulating gas.Very convenient！The Non-HF start 16.4ft torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.

【THREE YEAR WARRANTY】SPRIGHOLLY is a brand you can trust backed by Our 24-hour customer service and after-sales support. You can solve any problems you encounter in the US after-sales center,Add this to your cart now.


Input power voltage AC115V, 50/60Hz; AC220V, 50/60Hz.

Rated input current 45A@110V±15%, 40A@220V±15%

Rated power capacity 5.15KVA @110V; 6.9KVA@220V .

Current adjustment range 110V:15-40A, 220V:15-50A

Plasma cutting thickness (mm) 110V:15-35A: Carbon Steel≤14.0; Stainless Steel≤14.0; Aluminum≤10.0; Copper≤3.0
220V:15-45A: Carbon Steel≤20.0; Stainless Steel≤20.0; Aluminum≤12.0; Copper≤5.0

Voltage adjustment range 94V@110V±15%, 98V@220V±15%

No-load voltage 280±20V@110V, 280±20V@220V

Rated duty cycle 60%

Efficiency 80%

Power factor 0.7

Protection class IP21S

Insulation class F