New KOP & WDHOM Aluminum Mig Welder Machine 200Amp 110/220V Gas and Gasless MIG welding machine

【Aluminum Welder Machine】Mig welders 110/220 volts with gas and gasless welder machine,gasless (flux-cored wire) and gas welder (solid wire)flux core welder,work with gasless flux wire perfectly,2/10LB wire spools,flux core .030”/.040” solid wires to weld about 0.5” plate thickness for carbon steel stainless steel/mild steel.
【MMA/ Lfit TIG 】MMA/ Arc stick welding (3.2mm electrode) 7018 1/8 "very good, also 6013 and 7018 3/32". Suitable for rods with size from 1.6mm to 3.2mm. Lift TIG non high frequency tig mode, just switch to "lift tig" on the panel ,the tig torch easy purchase in the market.
【Spool Gun Aluminum Welder】This welder can be connected to spool torch,with excellent Aluminum welding( spool gun not included in package), Easy to start within 5mins simple install and full of package kits suit for outdoor/outdoor working.The spool gun can be purchased separately in our shop.
【Welding Performance】Wire speed of 2-15 meters/min at 200A,automatic transfer between 220V and 110V, 220V with 200amp output Under Duty cycle 200A with 40% and 126A with 100%. 110V with 140amp output under Duty cycle 140A with 40% and 98A with 100%.
【Warranty Support】1 year warranty, local friendly customer service support,buy with confidence.Great for DIY users,maintenance and repair/metal fabrication,easy work with new welders or users.


Actual quality of the welds looks to be great once you have catch a proper setting for the knobs.TIPS for novice users:

For this welder machine how to weld aluminum and adjusted voltage or current, you need get the correct use method:

1.This welder has no preset voltage and current, only when the machine is welding, the digital display the welding voltage and welding current.If you want to achieve the best effect by adjusting the current and voltage values.Recommended that the pointer directions of the current and voltage knobs in the same position for the best state.

2.This unit is multi-function machine. In mig mode it supports mig gun and spool gun functions. if you needs spool gun to weld aluminum, and you have purches our spool gun, When using spool gun, but the welding wire still not come out, maybe mig and spool gun conversion switch not open, it inside of the machine,you should open the button(visible by opening the case cover).

If you are a skilled welder, you can adjust it according your needs of use.

Multi-function welding machine

MIG/Gas/Gasless/Stick/MMA//LIFT TIG welding
With 2T/4T are available,improve work efficiency and reduce welder fatigue
Welding Stainless steel, Mild Steel，Aluminum , Other Metal material.
1 year service with the welding machine

Excellent aluminum welder

Very convenient to use the spool gun,welding effect of aluminum is excellent.
Accepts 2-10 pounds flux core and solid wires,best welding plate thickness is 0.5-5(mm) ,with 030"-.040"（0.8/1.0 mm ）to weld over .030"(0.8mm) plate thickness.


High-quality accessories

1*Power source Mig welder KP MIG200D

1*10-25 DINSE Connector and 2M*25MM2 cable 300A earth clamp

1*10-25 DINSE Connector+2M*25MM2 cable 300A electrode holder

1*3m Mig MB15 welding torch

1*Flux cored wire 1lb without gas weld

1*3m Welding gas hose

1*20mm 110/220V conversion line

Note: Free stickers will increase your DIY fun.