New Dexgothic Aluminum MIG Welder 200Amp 220V DG-2000 5 in 1 Multi-Process Mig welding machine

Aluminum Welding: This DG-2000 supports spool gun so that it can weldes aluminum with good work.

STICK MODE: If you want to repair some broken fences or fix brackets, with traditional welding rods for operation, you can use DG-2000 MMA mode for welding(To adjust the current, through knob “STICK/LIFT TIG”)

LIFT-TIG MODE: DG-2000 for thin plates with higher welding process requirements or welding with higher process requirements, especially for stainless steel welding, you can use the LIFT TIG mode, which requires pure argon

MIG MODE: DG-2000 provides two welding modes: gas shielded welding and self-shielded welding with fluxed wire. If you want a better welding effect, it is recommended to select the gas welding mode; if you need to go out to work, carry gas cylinders and other inconvenient situations, you can use the Gasless(FLUX CORE) mode.

Warranty: 1-year warranty and refund or replacement with any problems in 30 days.

Mig Welding Machine IGBT Inverter 5 in 1

MIG Gas/MIG Gasless/Tig Welding/Stick Welder/aluminum welding

Input power voltage (V)：220V±10%，50/60Hz

Rated input current (A)：35.2

Rated power capacity (KVA)：7.7

Current adjustment range (A)：MIG:30-200 STICK:30-150 TIG:30-150

Welding thickness (mm)：>1.0

Voltage adjustment range (V)：15-24

No-load voltage (V)：50±5

Electrode diameter (mm)：0.8/1.0

Rated duty cycle(25℃)：60%


Additional package configuration list：

DG-2000 welding X 1
MB15 welding torch X 1
Welding holder X 1
Ground clamp X 1
Gas tube X 1
Hose clamp X 2
Conductive tip0.8 X 2
Conductive tip1.0 X 2
Porcelain nozzle X 2
V-shaped wire feed wheel X 1
The gear wire feed wheel X 1
Flux-cored wire X 1
Manual X 1